MTI CX FLEX Single-Power Product Manual page 7

LED STATUS INDICATORS
Visual Reference
LED is solid blue.
LED is flashing blue.
LED is solid yellow.
WARNINGS
1. For indoor use only, shall not be exposed to dripping or splashing.
2. Do not expose to excessive heat sources, sunshine, fire or the like.
3. The socket-outlet shall be installed near the equipment and shall be easily accessible.
4. No user replaceable parts inside, refer servicing to manufacturer specified agency or qualified service
personnel.
5. Only use accessories/battery specified by the manufacturer.
Disposal:
All electrical and electronic products including batteries should be disposed of separately
from the municipal waste stream via designated collection facilities appointed by the
government or the local authorities.
www.mtigs.com | T:800.426.6844
System Status
Overcurrent when armed
Overcurrent when disarmed
Delete Whitelist Mode (If using
Authorization Card)
CX FLEX™ SINGLE-POWER PRODUCT MANUAL
Condition
System has gone into overcurrent protection. Unplug any
product which may be drawing too much power.
System has gone into overcurrent protection and user has
disarmed the system. Unplug any product which may be
drawing too much power. The system will self-heal.
System is deleting whitelist. Wait until complete.
Solution
MTI P/N 063-00308 rev 2 ©2019 MTI All Rights Reserved
7