MTI CX FLEX 4A Product Manual

Advertisement

CONTENTS
Contents
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
www.mtigs.com | T:800.426.6844
Product Manual for
CX FLEX™ 4A
DO NOT REMOVE FROM STORE
For additional support, please reach out to our
Contact Center at 800-426-6844
CX FLEX™ 4A PRODUCT MANUAL
WORKS WITH
MTI P/N 063-00318 rev A ©2019 MTI All Rights Reserved
2
3
4
4
5
5
5
6
6
7
9
10
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CX FLEX 4A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for MTI CX FLEX 4A

  • Page 1: Table Of Contents

    Deleting Enrolled Keys LED Status Indicators Dimensions FCC and ISED Statement DO NOT REMOVE FROM STORE For additional support, please reach out to our Contact Center at 800-426-6844 www.mtigs.com | T:800.426.6844 MTI P/N 063-00318 rev A ©2019 MTI All Rights Reserved...
  • Page 2: Materials In Box

    CX FLEX™ 4A PRODUCT MANUAL CX Flex™ 4A Power Supply (400-00143) Use provided AC/DC adapter model W&T AD1806B050025U manufactured by W&T Electronics Co., Ltd. with output rating 5V d.c. 0.25A only. www.mtigs.com | T:800.426.6844 MTI P/N 063-00318 rev A ©2019 MTI All Rights Reserved...
  • Page 3: Installation

    Press down on the base plate for 20 seconds for full VHB completely dry. Peel the red film from the VHB adhesive. contact. Allow 24 hours for full VHB adhesion. www.mtigs.com | T:800.426.6844 MTI P/N 063-00318 rev A ©2019 MTI All Rights Reserved...
  • Page 4: Key Enrollment

    1 immediately by holding an enrolled User Card over the minute if the product surface is curved, or 30 seconds RFID Icon. if it is flat. www.mtigs.com | T:800.426.6844 MTI P/N 063-00318 rev A ©2019 MTI All Rights Reserved...
  • Page 5: Managing Alarms

    User Key over the RFID icon to RFID icon or system will auto-arm disarm the system. LED will be after 1 minute. flashing white. Then remove the cable. click www.mtigs.com | T:800.426.6844 MTI P/N 063-00318 rev A ©2019 MTI All Rights Reserved...
  • Page 6: Adding New User Keys

    If successful  unit beeps 2 times and the LED will turn solid green If unsuccessful  unit beeps 4 times (wrong Authorization Card) www.mtigs.com | T:800.426.6844 MTI P/N 063-00318 rev A ©2019 MTI All Rights Reserved...
  • Page 7: Led Status Indicators

    NOTE: System will arm in this state if merchandised. System has an Authorization Card, but System LEDs are solid green. Ready to Whitelist does not have any User Keys enrolled. Follow key enrollment process. www.mtigs.com | T:800.426.6844 MTI P/N 063-00318 rev A ©2019 MTI All Rights Reserved...
  • Page 8 Connect properly. Network. PORT LED STATUS INDICATORS Armed Alarming System and Port LEDs are solid white. System LEDs and Alarming Port(s) are flashing red and white. www.mtigs.com | T:800.426.6844 MTI P/N 063-00318 rev A ©2019 MTI All Rights Reserved...
  • Page 9: Dimensions

    DIMENSIONS CX FLEX™ 4A PRODUCT MANUAL 4.60" [116.97mm] www.mtigs.com | T:800.426.6844 MTI P/N 063-00318 rev A ©2019 MTI All Rights Reserved...
  • Page 10: Fcc And Ised Statement

    Subjecting a battery to very low air pressure or high altitudes can result in explosion or leaking of flammable liquid or gas. This product shall not be used under low pressure and high latitude. www.mtigs.com | T:800.426.6844 MTI P/N 063-00318 rev A ©2019 MTI All Rights Reserved...

Table of Contents

Save PDF