ADIC Server User Manual page 97

struct aci_ei_info {
};
Figure 4-45
Table 4-20
Parameter
eject_area
volser_range
type
pnActualCount
aci_ei_info
21 Dec 2001
The volser_range field has a maximum size of 512 bytes.
See Figure 4-45 for the structure of the aci_ei_info function.
char volser[ACI_VOLSER_LEN];
char media_type[ACI_DRIVE_LEN];
int errcode
Structure of the aci_ei_info function
See Table 4-20 for a description of the parameters for the
aci_eject3_complete function call.
Parameters for the aci_eject3_complete Function Call
logical area defined in AML, where the cartridges
should be ejected
• a single volser
• multiple volsers separated by commas
• a range of volsers separated by a hyphen
• set to empty ("" or '\0') if it is not to be changed
media type of the named volser range
Refer to Media Types on page 2-7
returned number of ejected volsers
returned information to each ejected volser
volser
type
errcode
If the eject area is full the system stops the eject procedure.
Depending on the DAS_EJECTAREAFULL environment
variable on the AMU, the command will be canceled, or the
system starts with the next eject after the operator has
removed cartridges from the eject area.
Description
volser of the ejected volume
media type of the named volser
Refer to Media Types on page 2-7
Error code derrno
aci_eject3_complete 4-55