ADIC Server User Manual page 205

Table A-1
Number
14 EBADHOST
15 ENOAREA
16 ENOTAUTH
18 EUPELSE
19 EBADCLIENT
20 EBADDYN
21 ENOREQ
21 Dec 2001
Error Code Reactions
d_error Name Recommended Reactions to the Error Code
DAS was unable to resolve the IP-name to an
address, or the address is invalid. Check the
TCP/IP command. Set the IP-configuration and
change configuration data in AMU or the
environment.
The named insert or eject area was not found in
the configuration. Try the command with another
area name, or change the AMS configuration.
Access privilege limitations for the requesting
client are defined in the config file parameters.
Change the configuration. This can be
temporarily done by aci_register. For a longer
term change, use another client or change the
config file.
DAS has found that the drive is reserved by
another client.
• Check which client has reserved the drive and
the status of the drive (occupied or empty) with
aci_drivestatus2.
• Set the drive for the other client down with
aci_driveaccess (if occupied use FDOWN).
• If the drive is occupied, send an unload
command to the drive and to DAS with
aci_dismount.
• Set the drive for the Client UP with
aci_driveaccess.
The Client only BASIC rights. Change the
Clientname on the ACI to a Client with Complete
rights or change the Configuration file.
not used
The aci_cancel command was used with a invalid
sequence number.
• check the command queue for the correct
sequence number with aci_list
• try the aci_cancel command with the correct
sequence number
Error Recovery Procedures A-5