Overview; Error Recovery Procedures - ADIC Server User Manual

Overview

Error Recovery Procedures

Table A-1
Number
0 EOK
1 ERPC
2 EINVALID
3 ENOVOLUME
4 ENODRIVE
5 EDRVOCUPPIED
21 Dec 2001
This section contains information on error recovery
procedures and explanations of terms used throughout this
document.
This section contains information on error recovery
procedures. See Table A-1.
Error Code Reactions
d_error Name Recommended Reactions to the Error Code
No error.
Communication problem, test the TCP/IP to the
AMU PC and, if possible, try an alternate route.
A parameter in the command is wrong, try it with
other parameters.
Volser from the command with the media type is
not found in the AMU database. Check the media
type in the command. If a mismatch is detected
between the archive and the database, update the
AMU database with the inventory command.
Otherwise try the command with another volser
The drive parameter in the command does not
match any drives in the AML. Change the
parameter in the command.
The drive named is already used for another
cartridge.
• Send an unload command to the drive.
• Send a dismount command to the DAS
software.
• Wait until the previous mount (also possible for
cleaning) is completed.
A-
Overview A-3