Related Manuals for ITW Simco-Ion S165S
Summary of Contents for ITW Simco-Ion S165S
- Page 1 SM Shockless Static Neutralizing Bars with S165S & S265S Power Supplies INSTALLATION AND OPERATING INSTRUCTIONS 5200767 Rev. F SM Shockless Static Neutralizing Bars...
- Page 2 TABLE OF CONTENTS 1. SAFETY WARNINGS ........................1 2. DESCRIPTION ..........................1 Receipt of Equipment ......................2 Return Shipments ........................2 3. SPECIFICATIONS ..........................2 4. INSTALLATION ..........................3 Grounding ..........................3 Mounting Static Neutralizing Bars ..................3 Mounting Power Supplies ......................4 Installing High Voltage Cables ....................4 5. OPERATION ..........................4 6.
- Page 3 1. SAFETY WARNINGS NOTE – Statements identified with a NOTE indicate precautions necessary to avoid potential equipment failure. CAUTION – Statements identified with a CAUTION indicate potential safety hazards. NOTE – This equipment must be correctly installed and maintained. Adhere to the following notes for safe installation and operation. 1.
- Page 4 The SM and RSM static neutralizing bars are shockless bars with capacitively coupled ionization points. The capacitively coupled design provides a safety feature that prevents hazardous electrical shocks if there is contact with the ionizing pins. This safety feature does not compromise the static bar’s performance. The RSM bar has the same features as the SM bar but is equipped with an integrated compressed air tube that extends its range and reinforces the bar.
- Page 5 4. INSTALLATION Grounding It is essential that the machine frame be grounded either through well-grounded electrical conduit or by heavy copper wire connecting the frame to a water pipe. The static neutralizing bar’s metal casing must be grounded to avoid operator shock and to ensure proper operation.
- Page 6 Mounting Power Supplies Mount power supplies to the machine frame (preferably away from operator contact) or to a nearby wall or post. Installing High Voltage Cables 1. Route the high voltage cables attached to each static bar along the machine frame or wall to the power supply.
- Page 7 6. MAINTENANCE NOTE – Only qualified service personnel are to perform maintenance tasks. NOTE – Never use hard or sharp objects to scrape ionization points. CAUTION – ELECTRICAL SHOCK HAZARD De-energize all power supplies before performing any maintenance tasks. CAUTION – FIRE HAZARD Never energize a power supply with any trace of alcohol remaining on the equipment.
- Page 8 8. WARRANTY This product has been carefully tested at the factory and is warranted to be free from any defects in materials or workmanship. Simco-Ion will, under this warranty, repair or replace any equipment that proves, upon our examination, to have become defective within one year from the date of purchase.
Need help?
Do you have a question about the Simco-Ion S165S and is the answer not in the manual?
Questions and answers