Automatic Tuning; Saving Preset Stations - Clas Ohlson Seahorse 38-4256 Manual

Automatic tuning
1. Turn the unit on using [ ] (9).
2. If necessary, press [Fn] (5) to select the radio mode.
3. Press [ST/MO] (1) to select stereo or mono.
4. Press and hold in [TUN] (3) for 3 seconds to start automatic station search.
The unit stops at the first station it finds. Press and hold in [TUN] (3) for another
3 seconds to continue searching.
5. Set the desired volume using [VOL] (8).
6. Press [MODE] (6) to switch the display from clock to radio frequency and
vice versa.
Saving preset stations
1. Turn the unit on using [ ] (9).
2. If necessary, press [Fn] (5) to select the radio mode.
3. Search for the station to be saved (refer to Manual tuning or Automatic tuning).
4. Press [MEM] (7) and "CH01" (channel 1) starts flashing on the display.
5. Press [CH/DIR] (8) to choose a channel slot for the station.
6. Confirm your choice by pressing [MEM] again.
7. Up to 20 stations can be preset using the steps 3–6 above.
Listening to music from USB flash drives/
memory cards
1. Dry the unit thoroughly if it has been in contact with water.
2. Unscrew the lower half of the unit by turning it anticlockwise.
3. Open the battery compartment by opening the lock (11).
4. Insert a USB flash drive and/or memory card containing MP3 files to
the respective slots (12 and 15).
5. Close the battery cover.
6. Screw the lower half of the unit back on.
7. Turn the unit on using [ ] (9).
8. Press [Fn] (5) and select USB or SD. Your selection will appear on the display.
9. The unit automatically plays MP3 files from the selected memory.
10. Change tracks up or down in the playlist using [◄◄] / [►►] (3).
11. Change playlist/folder using [CH/DIR] (8).
12. To pause, press [►ll] (4). To resume playback, press [►ll] again.
13. To stop playback, press [MEM] (7).
14. Press [MODE] (6) to switch the display from clock to track information and
vice versa.
6