Clas Ohlson 31-2186 Instructions For Use

RC Dino
Art.no 31-2186
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right for any
errors in text or images and any necessary changes made to
technical data. In the event of technical problems or other queries,
please contact our Customer Services.
Safety
This product is not suitable for children under the age of 3.
Contains small parts. Choking hazard.
0-3
Care and maintenance
• Clean the product by wiping it with a damp cloth. Use only mild
cleaning agents, never solvents or corrosive chemicals.
• Remove the batteries from the remote control and the figure and
store them both in a dry, dust-free environment and out of the
reach of children whenever they are not to be used for an exten-
ded period.
Responsible disposal
This symbol indicates that the product should not be
disposed of with general household waste. This applies
throughout the entire EU. In order to prevent any harm
to the environment or health hazards caused by incor-
rect waste disposal, the product must be handed in for
recycling so that the material can be disposed of in a
responsible manner. When recycling your product, take
it to your local collection facility or contact the place of
purchase. They will ensure that the product is disposed of in an envi-
ronmentally sound manner.
Specifications
Dimensions 35 × 12 × 21 cm
Weight 585 g
Batteries
Remote control 2 x AAA/LR03 (sold separately)
Dinosaur 4 x AA/LR6 (sold separately)
United Kingdom • www.clasohlson.co.uk
Instructions for use
Batteries
Never mix old and new batteries. Never mix rechargeable and
non-rechargeable batteries.
Remote control
1. Remove the battery cover on the back of the remote control and
insert 2 x AAA/LR03 batteries (sold separately).
Refer to the markings in the battery compartment to ensure
correct polarity.
2. Refit the battery cover.
Dinosaur
1. Remove the battery cover on the bottom of the figure and insert
4 x AA/LR6 batteries (sold separately).
Follow the markings on the battery cover
to ensure correct polarity.
2. Refit the battery cover.
Switching on/off
A button on the front of the figure switches it on and off.
Remote control buttons
1
2
3
4
5
6
1. Walk forwards
2. Turn left
3. Walk backwards
4. Music
5. Increase volume
6. Programming button. The programming function enables you
to decide in advance what the dinosaur will do. Refer to the
programming section
7. Stop
8. Turn right
9. Dinosaur roar
10. Dance
11. Decrease volume
Programming
1. Press the programming button (6) once, the dinosaur will emit an
audible signal.
2. Press buttons 1, 2, 3, 4, 8, 9 or 10 in the order that you wish the
dinosaur to perform the movements or sounds.
3. Press the programming button (6) again, the dinosaur will now
perform the movements and/or sounds programmed in step 2
above.
English
7
8
9
10
11