DCCconcepts Cobalt Alpha Series Manual page 11

Upgrading Bachmann
The Bachmann E-Z Command
for "train-set" inclusion, so, in order to keep costs low, both its functionality and its power out-
put are limited. Because of this, many are relegated to the bottom drawer soon after purchase.
E-Z Command ® does meet all relevant DCC standards and some owners like its "very simple
to use" interface, but it has not been easy to upgrade and add features that really ARE needed!
However - We can now offer a solution: In fact it is VERY easy to upgrade E-Z Command's very
low power output with Cobalt
using Cobalt Alpha or Cobalt
Here is how to do it, connection by connection...
PS: This is a ZERO waste upgrade too, because if you change brand later, your Cobalt
Cobalt Alpha or Cobalt
Connect track power out
to the track power input
DCCconcepts
6-wire RJ12
"Curly Cord"
Connect any kind of
DCC Accessories to
your new track bus
and control them with
Cobalt Alpha
or
Central
Alpha
Need information or help?
® is a nice quality but very basic DCCcontrol system designed
and we can easily add full digital Accessory control by
Box
Central, Giving your DCC system much greater abilities!
Central will all still work perfectly with it!
Also connect either
Cobalt Alpha or
Alpha Central.
Use the Curly Cord
supplied with them.
(This adds Digital
Accessory Control)
Visit www.dccconcepts.com/manuals-advice OR email advice@dccconcepts.com
E-Z C
OMMAND
SWITCH to the
TRACK position
This is
Alpha Box
This is
Alpha Power
Just a couple of connections
and you have upgraded to a
full 5 amps track power, with
full overload protection...
...and you have easy to use
"Digital Accessory Control" too!
page 12
®
,
Box
SIMPLE ISN'T IT