Table of Contents
Advertisement
Use the AirPresence Key to Share Content
1
Plug the AirPresence Key into the USB port on
the lower right side of the Board.
Pair an AirPresence Key with the Board when they are used together
for the first time.
a. Plug the AirPresence Key into the USB port on the endpoint.
The message indicating that a USB device is detected is displayed on the
Board.
Once the AirPresence Key and endpoint are successfully paired, a pairing
success message appears on the Board.
b. Remove the AirPresence Key from the endpoint.
2
Share content.
b
a. Plug the AirPresence Key into the USB port on the PC.
b. Install the AirPresence Key program on the PC.
Run the AirPresence Key installation program on the PC and
complete the installation as instructed.
After the installation is complete, a message is displayed
indicating that the connection was successful and that you
can press the button to start sharing.
c. Press the button on the AirPresence Key to share the
PC desktop.
To stop sharing, press the button again.
About the AirPresence
Key
When you pair an AirPresence
Key with the Board of a later
version, the AirPresence Key
will be upgraded
automatically. The upgrade
takes about 1 to 3 minutes.
After the upgrade is complete,
they will be paired
automatically.
For details about how to
configure, install, and operate
a
the AirPresence Key and its
indicator description, see the
c
AirPresence Key Quick Start.
Q: The Board is running
properly, but the PC desktop
is displaying a message that
says no Board could be found
and the connection has failed.
What is the problem?
A: The pairing between the
AirPresence Key and the
Board is invalid. Pair them
again.
Advertisement
Table of Contents
