Installation
Figure 3.
Refer to
Figure 4.
Optional Sensors (ReliaTel Only)
If the optional sensors for humidity and temperature monitoring are to be used (BAYENTH005A
and BAYENTH006B), install them now. Use the instructions provided in the kits.)
Blockoff Asssembly
The return duct blockoff plate(s) must be installed prior to the installation of the economizer in the
unit. Refer to
Return Air Smoke Detector, refer to
Note: If either Power Exhaust or Barometric Relief Accessory kits are installed along with an
6
Figure 4
for reassembly instructions to Horizontal configuration.
Figure 5
for installation in units without Return Air Smoke Detector. If the unit has a
Economizer, do not install the duct blockoff plate.
Figure 6
for installation.
ACC-SVN44D-EN