Timer And Sleep Operation - Sharp SD-SG11 Operation Manual

Timer and Sleep Operation

Timer playback:
The unit turns on and plays the desired source (CD, MD, TUNER, AUX, OPT) at the
preset time. At the end time, the unit enters the power stand-by mode automatically.
Timer recording:
The unit turns on and starts recording from the desired source (TUNER, AUX, OPT)
at the preset time. At the end time, the unit enters the power stand-by mode automat-
ically.

Timer playback/Timer recording
Before setting timer:
While the power is in the stand-by mode, press the DISPLAY button on the re-
mote control to check that the clock is on time.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TIMER/DELETE button.
3
Within 10 seconds, press the REC LEVEL/CURSOR
to select "TIMER SET".
4
Within 10 seconds, press the ENTER button.
01/7/12 38-48.fm
SD-SG11
or button
Continued to the next page
E-38
E
F