Precautions - Sharp SD-SG11 Operation Manual

1-bit digital audio component
Table of Contents

Advertisement

Available languages

Available languages

Precautions

 General

Please ensure that the equipment is positioned in a well-ventilated area and that
there is at least 4" (10 cm) of free space along the sides and back. There must
also be a minimum of 8" (20 cm) of free space on the top of the unit.
Left speaker
Right speaker
4" (10 cm)
4" (10 cm)

Use the unit on a firm, level surface free from
vibration.

Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home comput-
ers, facsimiles, etc.) which generates electrical
noise.

Do not place anything on top of the unit.

Do not expose the unit to moisture, to temperatures higher than 140°F (60°C) or to
extreme low temperatures.

If your system does not work properly, disconnect the AC power cord from the AC
outlet. Plug the AC power cord back in, and then turn on your system.

In case of an electrical storm, unplug the unit for
safety.
8" (20 cm)

Hold the AC power plug by the head when removing
it from the AC outlet, as pulling the cord can damage
internal wires.
4" (10 cm)

Do not remove the outer cover, as this may re-
sult in electric shock. Refer internal service to
your local SHARP service facility.

This unit should only be used within the range of 41°F - 95°F (5°C - 35°C).
Warning:

The voltage used must be the same as that specified on this unit. Using this prod-
uct with a higher voltage other than that which is specified is dangerous and may
result in a fire or other type of accident causing damage. SHARP will not be held
responsible for any damage resulting from use of this unit with a voltage other than
that which is specified.

This product is equipped with a cooling fan on the back of the amplifier for better
heat radiation.
01/7/13
01-14.fm
SD-SG11
E
F
E-2

Advertisement

Table of Contents
loading

Table of Contents