Sharp SD-SG11 Operation Manual page 14

SD-SG11
System Connections (continued)

Connecting MD/CD/tuner unit and amplifier
unit
Connect the tuner unit and the amplifier unit using the sound connection cord and the
system connection cord included with this unit.
MD/CD/tuner unit
SYSTEM OUT
White
Red
Plug in with
mark facing up.
Unplug it while pressing the lug on the connector.
E-11
Amplifier unit
SYSTEM IN
Plug in with
mark facing down.
White
Red
Sound connection cord
System connection cord

Connecting the AC power cord
After checking all the connections have been made correctly, connect the AC power
cord to the AC power input jack, then plug the AC power cord of this unit into the AC
outlet.
Notes:


Unplug the unit if it will not be used for a prolonged period of time.


Never use a power cord other than the one supplied. Otherwise, a malfunction or
an accident may occur.

Outdoor FM or AM antenna
Use an outdoor FM or AM antenna if you require better reception. Consult your
dealer.
Outdoor AM antenna
49 feet (15 m) Outdoor FM antenna
25 feet
(7.5 m)
Ground rod
Notes:


When an outdoor FM antenna is used, disconnect the supplied FM antenna wire
from the FM 75 OHMS jack.


When using an outdoor AM antenna, be sure to keep the wire of the AM loop
antenna connected.
01/7/13 01-14.fm
AC outlet
(AC 120V, 60 Hz)
AM loop antenna