Using Monitor Memory; Listening To A Monitor Memory; Moving A Frequency From A Monitor Memory To A Channel - Radio Shack PRO-79 Owner's Manual

200-channel vhf/air/uhf handheld scanner
Table of Contents

Advertisement

• If you entered a frequency that is already stored in
another channel,
numbered channel containing the duplicate frequency
flash on the display for about 3 seconds. If you want to
store the frequency anyway, press
4. To store the displayed frequency in a monitor memory,
press
MON/CL
quency flash twice.
5. To search for another active frequency, hold down
for about 1 second.

USING MONITOR MEMORY

Listening to a Monitor Memory

To recall a frequency stored in a monitor memory, press
then
.
M
MON/CL
the stored frequency appears.
Note: See Step 4 under "Searching the Service Banks" on
Page 28 for more information about storing a frequency in a
monitor memory.
To select other monitor memories, enter the desired monitor
memory's number (1—20), then press
Moving a Frequency from a Monitor Memory to a
Channel
1. Press
MAN
store the frequency, then press
channel number appear.
-dUPL-
.
, the monitor memory number, and the fre-
M
, the monitor memory number, and
, enter the channel number where you want to
(duplicate) and the lowest-
again.
ENT
again.
MON/CL
.
PGM
and the selected
PGM
or
MAN
flash and
CH
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

20-314

Table of Contents