Radio Shack PRO-2039 Owner's Manual page 4

select, so you can choose which ones you want to store.
NOTE: You can use the scanner's delay feature while using limit search
(see "Delay").
Follow these steps to search for active frequencies.
1. Press PGM, then LIMIT. LO appears on the display.
2. Using the number keys, enter the lower limit of the frequency range.
NOTE: If you enter an invalid frequency in Step 2 or 4, ERROR appears on
the display. Simply repeat the step.
3. Press ENTER, then LIMIT. HI appears on the display.
4. Using the number keys, enter the upper limit of the frequency range.
5. Press ENTER.
6. Press UP arrow to search from the lower to the upper limit, or press
DOWN arrow to search from the upper to the lower limit. -L-, SRCH,
and UP or DOWN arrows appear on the display.
7. When the scanner stops on a transmission, press MON to store the
frequency in the current monitor memory, or press UP or DOWN arrow to
continue the search.
Direct Search
When the scanner is stopped on a frequency, you can search up or down from
the current displayed frequency to find more frequencies you want to store.
NOTE: You can use the scanner's delay feature while using direct search
(see "Delay").
1. Press MAN or PGM.
2. Use the number keys to enter the frequency you want to start the search
from. Or, use the number keys to enter the channel number containing
the starting frequency. Then press MAN or PGM.
3. Press UP arrow to search up or DOWN arrow to search down from the