Turn On; Find The Correct Viewing Channel; Select The Correct Tv System; Change System Menu Language - Philips MCD263/98 User Manual

2
Press / repeatedly to toggle
between 12H and 24H.
3
Press CLOCK to confi rm.
»
The hour digits displays and begin to
blink.
4
Press / to set the hour and press
CLOCK to confi rm.
»
The minute digits displays and begin
to blink.
5
Press / to set the minute and press
CLOCK to confi rm.

Turn on

1
Press .
»
The unit switches to the last selected
source.
Switch to standby mode
1
Press again.
»
The clock (if set) appears on the
display panel.
Find the correct viewing
channel
1
Press to turn on the unit.
2
Press DISC to switch to disc mode.
3
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
• Go to the lowest channel on your
TV, then press the Channel Down
button until you see the Philips
screen.
• Press the source button repeatedly
on the remote control of your TV.
Tip
•
The video-in channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, VIDEO, HDMI etc. See the
TV user manual on how to select the correct
input on the TV.

Select the correct TV system

Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
1
Press SYSTEM MENU.
2
Select [Video Setup].
3
Select [TV System] and then press
4
Select a setting and then press OK.
• [PAL] - For TV with PAL color
system.
• [Multi] - For TV that is compatible
with both PAL and NTSC.
• [NTSC] - For TV with NTSC color
system.
5
To exit the menu, press SYSTEM MENU.
Note
•
When the HDMI cable is connected, the
System] option is unavailable.
Change system menu
language
1
Press SYSTEM MENU.
2
Select [General Setup].
3
Select [OSD Language] and then press
.
4
Select a setting and then press OK.
5
To exit the menu, press SYSTEM MENU.
.
[TV
EN 15