2. INSTALLATION – GENERAL
REQUIREMENTS
2.1 National Wiring rules may contain restrictions concerning the installation of these
water heaters in certain areas, eg bathrooms.
2.2 The water heater MUST be installed vertically.
2.4 Enough space should be left around the water heater for pipe connections and
for access to controls and any safety valves fitted. Refer to diagram 2, page 5
and the dimensions table, page 4 to determine a suitable position for the water
heater.
2.5 NOTE: Ensure the floor can support the full weight of the water heater, see table
below, for cylinder weights.
2.6 DO NOT install where the water heater may freeze.
Diagram 1 - Lifting
3