Something Not Working - Zanussi U33109 ZDE 26000 W Instruction Booklet

Something not working?

If a problem occurs, you can try to solve it yourself following the instructions below.
If you call out an engineer when one of the following problems occurs, or to repair
a fault due to incorrect use, the callout will be charged even if requested within the
guarantee period.
Problem
The drier is not
working
properly
The drying results are
not satisfactory
The drying cycle
exceptionally takes a
long time
12
Possible cause
• Mains plug disconnect-
ed
• The START button has
not been depressed.
• No programme selected
• Loading door open
• Fuse or residual current
circuit breaker in fuse
box (domestic installa-
tion) faulty
• Wrong programme
selected
• Filter blocked
• Wrong filling quantity
• Laundry not sufficiently
dried
• Deposit on the drum
inner surfaceor on the
drum ribs
• Vented air transport dis-
rupted
• Lint filter blocked
Solution
Plug in mains plug
• Press START button
• Select programme
• Close loading door
• Check fuse or residual
current circuit breaker.
Faults can be eliminat-
ed by an electrical engi-
neer
• Select another (time)
programme for the next
drying cycle
• Clean filter
• Observe recommended
filling quantity
• Pre-dry laundry suffi-
ciently
• Clean drum inner sur-
face and drum ribs
• Straighten N- air vent-
ing hose and/or clean
air venting ducts
• Clean lint filter