Sharp CD-DD4500 Operation Manual page 31

Changing the Speaker Setting (continued)
Speaker level setting
The output level of each speaker can be adjusted.
1
Press the MENU button repeatedly to select "SP LEVEL".
2
Within 8 seconds, press the ITEM button repeatedly to select the
speaker (CENT, RSUR, LSUR or SWFR) you want to adjust.
3
Within 8 seconds, use the SET UP ( W W W W W or X X X X X ) button on the re-
mote control to adjust the level.
You can change the level within a range of +10dB to –10dB at 1dB intervals.
Front speaker balance setting
You can adjust the balance between the left and right channels of the front speakers.
1
Press the MENU button repeatedly to select "SP LEVEL".
2
Within 8 seconds, press the ITEM button.
3
Within 8 seconds, press the SET UP W W W W W button to increase the
right speaker level (the left speaker level to decrease), or press
the SET UP X X X X X button to increase the left speaker level (the right
speaker level will decrease).
The speaker balance, as shown in the display, can be changed within the range
of "1" to "10".
Note:
The surround speaker balance will not be changed.
To balance speaker level:
In step 3, use the SET UP ( W or X ) button on the remote control to select "F-SP CEN".
CD-DD4500
ENGLISH E-30
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15