Wifi Setup; Figure 21 Home Network Screen; Figure 22 Wifi Set-Up Screen - Foxtel Business iQ Installation Manual

Set-back-box

Hide thumbs Also See for Business iQ:

Table of Contents

10.2.2.

Wifi Setup

After switching internet connectivity to Wi-Fi as per section 10.2.1, the Wi-Fi interface

is configured via the Wi-Fi setup screen (see Figure 22) using the instructions below,

dependent on if the network (SSID) in visible (typically the case during first time

institution at a property) or hidden.

Visible Network

(1) Set Configuration to Automatic in Wi-Fi setup screen (if it is not already) by

pressing OK on Configuration, using the left-arrow key to select Automatic and

then pressing OK to confirm the selection.

(2) Navigate down to Detected SSIDs. Wait for Wi-Fi networks to be detected,

then press OK key.

(3) Use the right/left arrow keys to choose the SSID allocated by the property to

Foxtel and press OK to confirm.

Note: The quality should be a minimum of 50 for correct operation of the SBB. If it

is not, please inform Foxtel Business.

(4) Navigate down to Password and press OK to display the virtual keyboard in

Figure 23.

Printed: 21 OCT 2020

Business iQ (BiQ) Set-Back-Box Installation Guide

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the Business iQ and is the answer not in the manual?

Biq