Advertisement
Step 17: Wall Mount (Requires wall mount bracket kit). Line up brackets with the four holes shown. Secure with
four black screws. System can now be mounted to wall or surface.
Step 18: Dual COM Port installation (optional). Remove I/O punchouts from front of system. Remove the retainer
screws from each port connector, four in total.
Step 19: Line up the COM ports with the correct holes. Check the attached labels to ensure the ports are
mounted to the matching labeled I/O hole. Secure with retainer screws.
Step 20: Attach the grounding wire to the closest board mounting screw as shown. Connect the cable to the
COM Port 1/Port 2 connector (CN2).
Advertisement
