Advertisement
Step10: Thread the power button cable through the hole for the power button. Button should line up with
notch at the top of the hole. Plug the cable into the front panel connector (CN3), then gently push the power
button in until it is secure (you will hear a 'click').
Step 11: Thread USB 2.0 cable into USB bracket. Note the placement of the cable with the bracket opening.
PICO-KBU4-SEMI Quick Installation Guide
Step 12: Insert bracket into system with opening pointed towards heatsink (check image below for alignment).
Secure to I/O panel with two black screws as shown. Connect cable to USB 2.0 port connector (CN19).
Step 13: Attach SATA cable to CN7 and SATA Power cable to CN9. DO NOT attach to storage device at this time.
Advertisement
