TP-Link deco AC1300 How To Set Up page 12

Step 1 Launch the Deco app, tap the Settings icon at the bottom right corner, then
tap Advanced.
Step 2 Tap Operating Mode, then choose Access Point mode. The app will indicate to reboot the
router, tap OK.
Step 3 Wait for about 2 minutes until the LED light recovers to solid green, then the Deco system
should work in AP mode.
In AP mode, you're able to change some basic settings on the Deco app including Wireless
Settings, LED Control, etc.
In addition, you can also tap Advanced -> Working Mode to switch back to Router mode.
12