Wohler FA 320 Manual page 15

3.2 Key Pad
3.2.1 Power
Press to turn on and off the meter.
When the meter is off, press the POWER key more than two seconds to enter the
unit selection.
3.2.2 MODE
Press the MODE key to select the different modes (temperature – dew point –
wet bulb – relative humidity - velocity).
3.2.3 ENTER
Press ENTER to confirm the setting and calibration.
3.2.4 Mx/Mn, UP,'
Press to view MAX/MIN value.
Press to select the value of each digital cycle.
3.2.5 REC/START
In velocity mode, press this key to store the current velocity into memory.
3.2.6 HOLD, DOWN,-
In basic modes press this key to hold the current reading, then press this key
again to unlock the holding.
Press to select the setting digital.
e-Mail: mgkg@woehler.de http://mgkg.woehler.de
Wöhler FA 320
15