D-Link DCS-4605EV Quick Installation Manual page 10

Screw the back part of the waterproof connector clockwise
until there is a tight seal around the Ethernet cable.
If you are using PoE to power your camera, use the
attached rubber power connector cover to seal the power
connector.
If you are using a power adapter(not included) to
power your camera, wind waterproof tape around the
connection in an overlapping manner to cover it.
Additional Information
Additional help and product information is available online at http://www.dlink.com.
Warranty Information
Please visit http://warranty.dlink.com/ for warranty information for your region.
10
D-Link DCS-4605EV Quick Installation Guide