Electro-Harmonix nano FREEZE Manual page 2

SLOW – When the footswitch is triggered, the FREEZE will sustain the current input,
fading in the effect. The sound will be sustained until the footswitch is released, at
which point the effect will fade out slowly. The speed of the fade can be set during
slow-speed initialization. See below.
LATCH – When the footswitch is triggered, the FREEZE will immediately sustain
your current sound. The sound will continue to be sustained upon releasing the
footswitch. When the footswitch is triggered again, the FREEZE will immediately
replace the sustained sound with the new current input.
footswitch will silence the effect.
– SLOW-SPEED INITILAZATION –
The speed at which the effect fades in/out in SLOW mode can be adjusted by
following these steps:
1) Unplug the power jack
2) Hold down the footswitch
3) While holding down the footswitch, plug in the power jack (LED will blink)
4) Move the mode switch to the preferred setting based on this table:
Switch Position Fade-in Speed
Up
Middle
Down
5) Release the footswitch, the FREEZE is ready for normal operation.
The FREEZE will retain the chosen fade speed through power cycles and will not
change until reinitialized.
A double-tap on the
Fade-out Speed
200ms 400ms
200ms 1.0 sec
800ms 3.2 sec
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and
return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will
repair or replace, at its discretion, a product that fails to operate due to defects in
materials or workmanship for a period of one year from date of purchase. This
applies only to original purchasers who have bought their product from an authorized
Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the
unexpired portion of the original warranty term.
If you should need to return your unit for service within the warranty period, please
contact the appropriate office listed below. Customers outside the regions listed
below, please contact EHX Customer Service for information on warranty repairs at
info@ehx.com or +1-718-937-8300. USA and Canadian customers: please obtain a
Return Authorization Number (RA#) from EHX Customer Service before returning
your product. Include with your returned unit: a written description of the problem
as well as your name, address, telephone number, e-mail address, and RA#; and a
copy of your receipt clearly showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
55-01 2ND STREET
LONG ISLAND CITY, NY 11101
Tel: 718-937-8300
Email: info@ehx.com
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email: electroharmonixuk@virginmedia.com
This warranty gives a purchaser specific legal rights. A purchaser may have even
greater rights depending upon the laws of the jurisdiction within which the product
was purchased.
To hear demos on all EHX pedals visit us on the web at www.ehx.com
Email us at info@ehx.com