Kenwood KDC-CMP59FM Instruction Manual page 22

Troubleshoot ing guide
The follow ing messages are displayed w hen certain problems are occurring in your system. Take the recommended
actions.
01 E: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
Load the disc magazine properly.
02 E: No disc has been loaded in the disc magazine.
Load a disc into the disc magazine.
04 E: No disc has been loaded in the disc magazine.
Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-dow n. The CD is scratched a lot.
Clean the CD and load it correctly.
77 E: The unit is malfunctioning for some reason.
Press the reset button on the unit. If the "77 E" code does not disappear, consult your nearest service center.
99 E: Something is w rong w ith the disc magazine. Or the unit is malfunctioning for some reason.
Check the disc magazine. And then press the reset button on the unit. If the "99 E" code does not disappear, consult your nearest service
center.
0d E: The protective circuit in the unit activates w hen the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all
operation. E0d
Cool dow n the unit by opening the w indow s or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc w ill
start playing again.
E02
E04
E77
— 22 —
E01
E99