Hisense Babysense V65-1 User Manual page 15

3. Press OK to start/finish se�ng
stands for star�ng the se�ng
Note:
* Press Up/Down/Le�/Right to select func�onality and press OK bu�on to confirm.
* If OSD is ON, the date and �me will be displayed on the status bar of the monitor, otherwise, it will not be displayed.
Restore factory se�ngs:
1. Choose Factory Se�ngs
and press OK.
1. Select
Press OK to enter the interface
4. stands for finishing the se�ng
2. Choose YES to restore to default se�ngs or choose
NO/Press BACK to exit the reset menu.