Sleep Mode; Scan Mode - Hisense Babysense V65-1 User Manual

SLEEP MODE

This func�on is the power saving mode, and is designed to prolong your monitors ba�ery life by pu�ng the monitor
into standby. When no sound is detected the screen turns off.
Once the camera registers a sound, louder than the set sensi�vity level, it will automa�cally start transmi�ng the
signal (sound and video) to the monitor and the screen will turn on.
Step1:
1. Press to access the menu
and press OK
Choose
Note: The screen will automa�cally light up if there is a sound alarm, a temperature alarm or sound is detected
in baby's room, in accordance with the set Wake-Up Sensi�vity level.

SCAN MODE

– Automa�c switching between paired Cameras
(This func�on is only available when two or more cameras are paired)
You can set the SCAN Mode and each paired Baby Unit will be displayed on the screen for 10 seconds and then
the screen will automa�cally change to the next paired camera.
• To ac�vate SCAN Mode press and hold Camera Switch Bu�on for 3 seconds
• A message "Camera SCAN Mode ON" will appear on the screen
• To deac�vate this mode, press the Camera Switch Bu�on briefly and a message "Camera SCAN Mode OFF"
will appear on the screen
2. Select the �me you want to elapse for the monitor
to go into Sleep Mode
Select OFF to turn off Sleep Mode