Using The Mark Function (Dvd/Vcd); Recalling A Marked Scene; Clearing A Mark; Using The Zoom (Dvd/Vcd) - Samsung DVD-V8000 Instruction Manual

Using the Mark Function (DVD/VCD)

GB
The Mark function lets you select parts of a DVD or VCD (MENU
OFF mode) so that you can quickly find the section at a later time.
- - -
ENTER
1
2
3
4

Recalling a Marked Scene

1
1 - - CLEAR
PLAY
2
3

Clearing a Mark

1
2
MARK MODE
3
INDEX REPEAT
1
54
During playback, press the MARK button on the remote. A marker
will be displayed.
Use the ➛, ❿!button to move to the desired bookmark icon.
When you reach the scene you want to mark, press the ENTER
button. The icon will change to a number (1, 2, or 3).
Press the MARK button to turn off the display.
During playback, press the MARK button on the remote.
Use the ➛, ❿!!button to select a marked scene.
❿
Press the ll (PLAY/PAUSE) button to skip to the marked scene.
During playback, press the MARK button on the remote.
Use the ➛, ❿!button to select the bookmark number you want to
delete.
Press the CLEAR button to delete a bookmark number.
Press the MARK button to turn off display.
Up to three scenes may be marked at the same time.
When in VCD 2.0 mode (MENU ON mode), this
function does not work.
Depending on the disc, the Bookmark function may
not work.

Using the Zoom (DVD/VCD)

1
During playback or pause mode, press the ZOOM button on the
remote. A square will be displayed on screen.
2 or ➛, ❿!button to select the part of the screen you
Use the ,
$ ❷
want to zoom.
3
Press the ENTER button.
- During DVD playback, press ENTER to zoom in 2X/4X/normal in
order.
- During VCD playback, press ENTER to zoom in 2X/normal in
order.

3D Sound Function

The simulated surround effect (SPATIALIZER N-2-2) depends on
the disc contents. If you connect the unit to your stereo system,
you can enhance sound quality and produce a greater surround
effect.
This feature is useful when you are using the DVD player with a
two channel stereo through the analog outputs.
(Discs which are recorded with LPCM or DTS will not work.
When the DOLBY DIGITAL OUT or MPEG-2 DIGITAL OUT are
set to BITSTREAM in the SETUP MENU, the 3D Sound function
will not work.)
3D SOUND
1 During playback, press the 3D SOUND ( ) button. The 3D
SOUND mark will be displayed on screen. (Be sure the DOLBY
DIGITAL OUT or MPEG-2 DIGITAL OUT are set to PCM.)
2 Press the , button to turn the 3D Sound feature on or off.
$ ❷!
3D Sound is possible only on discs recorded using
DOLBY SURROUND or DOLBY DIGITAL. However,
some of these discs do not contain rear channel
sound signals.
Depending on the disc, the Zoom and 3D Sound
function may not work.
GB
REC FRAME/STEP
1
3D
Off
55