Subscribe to Our Youtube Channel
Related Manuals for Samsung V80
Summary of Contents for Samsung V80
- Page 1 DVD-VCR DVD-V 70 DVD-V 80 DVD-V 85 I n s t r u c t i o n M a n u a l STANDBY/ON OPEN/CLOSE EJECT PROG LINE2 STANDBY/ON www.samsung.com.au...
-
Page 2: Table Of Contents
Contents ◆ F OREWORD Safety Instructions ... 5 ■ Disc Type and Characteristics ... 6 ■ ◆ DVD-VCR O VERVIEWS Front View of the DVD-VCR ... 7 ■ Rear View of the DVD-VCR ... 8 ■ Infrared Remote Control ... 9 ■... - Page 3 Contents ◆ R ECORDING ELEVISION ROADCASTS Selecting the Recording Speed... 32 ■ Protecting a Recorded Cassette ... 33 ■ Recording a Programme Immediately... 33 ■ Recording a Programme with Automatic Stop ... 34 ■ Using the G-CODE Feature ... 35 ■...
- Page 4 Contents (cont.) ◆ S OLVING ROBLEMS Technical Specifications ... 68 ■ Problems and Solutions (VCR) ... 69 ■ Troubleshooting Guide (DVD) ... 70 ■ This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
-
Page 5: Safety Instructions
Safety Instructions The following illustrations represent precautions. The lightning bolt is a warning sign alerting you to dangerous voltage inside the product. DO NOT OPEN THE DVD-VCR. Refer to service personnel. 40°C 5°C Do NOT expose the DVD-VCR to extreme temperature condi- tions (below 5°C and above 40°C) or to extreme humidity conditions (less than 10% and... -
Page 6: Disc Type And Characteristics
Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos : Disc Types (Logos) VIDEO-CD AUDIO-CD * DO NOT play CD-ROM, CD-I and DVD-ROM in this player! (CDGs play audio only, not graphics.) Disc Markings •... -
Page 7: Front View Of The Dvd-Vcr
DVD DECK BUTTON REW /SKIP BACK RECORD BUTTON BUTTON STANDBY/ON F.F / SKIP NEXT STOP BUTTON PLAY/STILL BUTTON BUTTON ( DVD -V80 ) STANDBY/ON DVD DECK BUTTON REW /SKIP BACK RECORD BUTTON BUTTON STANDBY/ON F.F / SKIP NEXT STOP BUTTON PLAY/STILL... -
Page 8: Rear View Of The Dvd-Vcr
Rear View of the DVD-VCR ( DVD -V70 ) DIGITAL AUDIO OUT SOCKET (COAXIAL) S-VIDEO OUT JACK ( DVD -V80 / DVD -V85) DIGITAL AUDIO OUT SOCKET (COAXIAL) S-VIDEO OUT JACK DIGITAL AUDIO OUT SOCKET (OPTICAL) LINE IN 1 RF ANTENNA INPUT... -
Page 9: Infrared Remote Control
Infrared Remote Control ( DVD -V70 ) STANDBY/ON STANDBY/ON OPEN/CLOSE SHUTTLE << / >> CLEAR DVD, VCR SELECT AUDIO REWIND SKIP BACK STOP SUBTITLE 10 MENU 11 UP 12 LEFT 13 DOWN 14 SPEED SP/LP 15 RECORD 16 TIMER 17 ANGLE 18 OPEN/CLOSE 19 0-9 20 TV/VCR... - Page 10 Infrared Remote Control ( DVD -V80 / DVD -V85) STANDBY/ON OPEN/CLOSE STANDBY/ON SHUTTLE << / >> CLEAR TV MUTE. AUDIO VOLUME +/– REWIND SKIP BACK STOP SUBTITLE 10 MENU 11 UP 12 LEFT 13 DOWN 14 SPEED SP/LP 15 RECORD...
-
Page 11: Display Indicators
VHS tape is inserted The VCR Deck is active Accessories You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR). Together with your DVD-VCR, you will find the following accessories in the box. REMOTE CONTROL AUDIO & VIDEO &... -
Page 12: Deciding How To Connect Dvd-Vcr
◆ Audio in LINE 2 Audio/Video ◆ COMPONENT out (DVD only) ◆ S-Video out (DVD only) S-JACK ◆ Digital Audio out (DVD only) ★ Optical (DVD-V80/ DVD-V85) coaxial ◆ Television 75 Ω coaxial ◆ Aerial 75 Ω ◆ Cable television network coaxial ◆... -
Page 13: Connecting Dvd-Vcr To The Tv Using The Coaxial Cable
Connecting DVD-VCR to the TV using the Coaxial Cable To receive television programmes a signal must be received from one of the following sources: ◆ An outdoor aerial ◆ An indoor aerial ◆ A cable television network ◆ A satellite receiver ☛... -
Page 14: Connecting Dvd-Vcr To A Satellite Receiber Or Other Equipment
Connecting DVD-VCR to a Satellite Receiver or Other Equipment You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following illustrations give a few examples of the connection possibilities. ➢ The RCA input/output connectors on the rear of the DVD-VCR are used for equipment, such as camcorders, VCRs or sound systems. -
Page 15: Plug & Auto Set Up
Plug & Auto Set up Your DVD-VCR will automatically set itself up when it is plugged into the mains for the first time. TV stations will be stored in memory. The process takes a few minutes. Your DVD-VCR will then be ready for use. Connect the coaxial cable as indicated on page 13. -
Page 16: Tuning Your Television For The Dvd-Vcr
Tuning Your Television for the DVD-VCR STANDBY/ON You must tune your television for the DVD-VCR only if you are not using a RCA cable ➢ To view pictures from your DVD-VCR when a RCA cable is used, the television must be set to the audio/video OPEN/CLOSE mode (AV). -
Page 17: Deck Control Keys
Deck Control Keys The DVD-VCR uses one set of controls to operate both decks. The following keys are helpful in successfully controlling each deck. STANDBY/ON Button Press the STANDBY/ON button on the remote control or front panel to turn on the DVD-VCR. DVD Button Press the DVD button on the remote control when you want to control the DVD deck. -
Page 18: Basic Tv Tuner Operations
Basic TV Tuner Operations The following buttons are used when watching television via the DVD-VCR’s built-in TV tuner. TV/VCR Button Press to switch between your TV’s tuner and the VCR’s internal tuner. PROG Press to change to the next or previous channel. 0-9 Buttons Press to select channels directly. -
Page 19: Inserting Batteries In The Remote Control
Inserting Batteries in the Remote Control You must insert or replace the batteries in the remote control when you: ◆ Purchase the DVD-VCR ◆ Find that the remote control is no longer working correctly Push the tab in the direction of the arrow to release the battery compartment cover on the rear of the remote control. -
Page 20: Setting The Menu Language
Setting the Menu Language Language Set English Français Deutsch Español Italiano Nederlands Open “MENU” After pressing the MENU, press the OK or Select “Language” Use the buttons to highlight “Language,” then press the OK or Set menu Language Place the selection arrow next to your desired Language, then press the OK button. -
Page 21: Presetting The Stations Automatically
Presetting the Stations Automatically ☛ You do not need to preset the stations if you have already set them automatically (see Plug & Auto Set Up on page 15). Your DVD-VCR contains a built-in tuner used to receive television broadcasts. You must preset the stations received through the tuner. -
Page 22: Presetting The Stations Manually
Presetting the Stations Manually Australia Model Auto Setup Manual Setup VCR Output CH : CH 38 Newzealand Model Auto Setup Manual Setup TV System VCR Output CH : CH 36 TV STATION TABLE NAME SWAPPING : OK DELETE : CLEAR MANUAL TUNING : - - NAME... -
Page 23: Clearing A Preset Station
Clearing a Preset Station If you have stored a TV station: ◆ That you do not require ◆ At the wrong programme position you can cancel it. After pressing the MENU, press the OK or Result: The Setup menu is displayed. Press the corresponding option. -
Page 24: Changing The Preset Station Table
Changing the Preset Station Table Australia Model Auto Setup Manual Setup VCR Output CH Newzealand Model Auto Setup Manual Setup TV System VCR Output CH : CH 36 TV STATION TABLE NAME - - - - SWAPPING : OK DELETE : CLEAR TV STATION TABLE NAME - - - -... -
Page 25: Selecting The Rf Out Sound Mode (B/G-D/K) (Newzealand Model Only)
Selecting the RF OUT Sound Mode (B/G-D/K) (Newzealand Model only) You can choose the sound mode (B/G or D/K) according to the TV set connected to your VCR. After pressing the MENU, press the OK or Result: The Setup menu is displayed. Press the corresponding option. -
Page 26: Selecting The Colour Mode
Selecting the Colour Mode DVD-V80/ DVD-V85 Australia Model Colour System : Auto : On G-Code Extend : Off Newzealand Model Colour System : Auto NICAM : On : On G-Code Extend : Off DVD-70 Australia Model Colour System : Auto... -
Page 27: Nicam (Newzealand Model Only)
NICAM (Newzealand Model only) NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound. Please refer to page 40. After pressing the MENU, press the OK or Result: The Setup menu is displayed. -
Page 28: Intelligent Picture Control
Intelligent Picture Control Australia Model Colour System : Auto : On G-Code Extend : Off Newzealand Model Colour System : Auto NICAM : On : On G-Code Extend : Off Intelligent Picture Control ( Remote Control ) The Intelligent Picture Control Feature allows you to adjust the sharpness of the image automatically, according to your own preferences. -
Page 29: G-Code Extend
★ G-CODE Extend (DVD-V80/DVD-V85 Only) To prevent delays or over-runs the VCR has a function called G- CODE EXTEND allowing you to extend the recording time by up to 60 minutes. After pressing the MENU, press the OK or Press the corresponding option. -
Page 30: Screen Message
Screen Messages Language : English Install User Set Auto Power Off : Off Screen Messages : On Selecting the Cassette Type Tape Select : E180 Repeat Play : Off S-VHS : Off Your DVD-VCR displays most information both on the DVD-VCR and the television. -
Page 31: Repeat Play
Repeat Play You can set repeat play to repeat the tape continuously from beginning to end. After pressing the MENU, press the corresponding to select the option. Press the OK or buttons to select this option. Result: VCR Setup Press the corresponding Play option is selected. -
Page 32: Selecting The Recording Speed
Selecting the Recording Speed Type Recording Time (in SP) E-180 180 mins. or 3 hours E-240 240 mins. or 4 hours E-260 260 mins. or 4 hours and 20 mins. E-300 300 mins. or 5 hours You can record a cassette at two different speeds: ◆... -
Page 33: Protecting A Recorded Cassette
Protecting a Recorded Cassette Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape. If you wish to protect a cassette, break off the tab using a small screwdriver. -
Page 34: Recording A Programme With Automatic Stop
Recording a Programme with Automatic Stop PROG STANDBY/ON LENGTH 2:30 SET LENGTH : PRESS This function enables you to record up to nine hours (LP) of programmes. Your DVD-VCR stops automatically after the requested length of time. EJECT Switch on the television. LINE2 To monitor the programme being recorded, select the television channel reserved for use with your DVD-VCR (or the AV input if... -
Page 35: Using The G-Code Feature
G-CODE code for the programme you wish to record. ™ G-CODE is a trademark of Gemstar Development Corporation. The G-CODE system is manufactured under licence from Gemstar Development Corporation. ★ (DVD-V80/ DVD-V85 Only) is displayed. buttons, until the G-Code option... -
Page 36: Modifying G-Code Programming
Modifying G-CODE Programming If you wish to correct the programme displayed or modify certain elements, such as the recording speed, you can do so before you press M If you wish to... Select an input source other than the tuner (LINE IN 1 or LINE IN 2) Record a programme every day (Monday to Sunday) at the same time Record a programme every week... -
Page 37: Using The Timer Programming Feature
Using the Timer Programming Feature The Timer Programming feature allows you to preset the DVD-VCR to record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset. ☛ Before presetting a recording, check that the date and time are correct. -
Page 38: Checking A Preset Recording
Checking a Preset Recording Cancelling a Preset Recording You can check your preset recordings: ◆ When you have finished presetting the DVD-VCR ◆ If you have forgotten which programmes will be recorded Press TIMER on the remote control. Result: The timer selection is displayed. Press the OK button to select Result: TIMER PROGRAMMING... -
Page 39: Playing A Cassette
Playing a Cassette This function allows you to play back any pre-recorded cassette. Switch on both the television and your DVD-VCR. Insert the video cassette to be played. If the safety tab on the cassette is intact, press Otherwise, the cassette is played automatically. ➢... -
Page 40: Selecting The Audio Output Mode
Selecting the Audio Output Mode MONO Playing a Cassette in Slow Motion You can select the mode in which the sound is reproduced on the loudspeakers and AV outputs. The following options are available. Option Used to listen to the sound on the left Hi-Fi channel. Used to listen to the sound on the right Hi-Fi channel. -
Page 41: Playing A Sequence Frame By Frame
Playing a Sequence Frame by Frame You can: ◆ Stop the cassette at a given frame (image) ◆ Advance one frame at a time ➢ No sound is heard when playing back frame by frame. Press: ◆ ll to start playing the cassette ◆... -
Page 42: Searching For A Specific Sequence
Searching for a Specific Sequence Each time you record a cassette on this DVD-VCR, an “index” is automatically marked on the tape when recording starts. The Search function allows you to fast-forward or rewind to a specific index and start playback from that point. Depending on the direction selected, the indexes are numbered as follows: Prev Seq. - Page 43 Searching for a Specific Sequence Intro Scan After pressing the SEARCH, press the corresponding buttons, until the Intro Scan Press the OK or Press the buttons depending on the direction where your desired programme is located. When an Index mark is found the DVD-VCR will playback the tape for 5 seconds, after which it will continue searching for the next Index mark.
-
Page 44: Using The Tape Counter
Using the Tape Counter 0:00:00 The tape counter: ◆ Indicates the elapsed time in the play and record modes (hours, minutes and seconds) ◆ Is reset when a cassette is inserted in the DVD-VCR ◆ Allows you to find the beginning of a sequence easily ☛... -
Page 45: Connecting An Rca Audio/Video Input Cable
Connecting an RCA Audio/Video Input Cable You can connect other audio/video equipment to your DVD-VCR using audio/video cables if the appropriate outputs are available on the equipment chosen. Examples: ◆ You wish to copy a video cassette with the help of a second VCR. -
Page 46: Using The Assemble Edit Function
Using the Assemble Edit Function Recoding from Another VCR or Camcorder STANDBY/ON PROG This function allows you to start a new recording at a specific position on the cassette while maintaining a very smooth scene change. Insert the cassette to be edited in your DVD-VCR. Press the ll button to start playback. -
Page 47: Using The Tv Buttons On The Remote Control
Using the TV Buttons on the Remote Control Your DVD-VCR remote control will work with Samsung televisions and compatible brands. To determine whether your television is compatible, follow the instructions below. Switch your television on. Point the remote control towards the television. -
Page 48: Choosing A Connection
Choosing a Connection The following show examples of connections commonly used to connect the DVD -VCR player with a TV and other components. It is only available for DVD. The VCR out can not watch by this connection. Connection to an Audio System Connection to an Television Television Dolby Digital Decoder... -
Page 49: Setting Up The Language Features
Setting Up the Language Features If you set the player menu, disc menu, audio and subtitle language in advance, they will come up automatically every time you watch a movie. Using the Disc Menu Language This function changes the text language only on the disc menu screens. - Page 50 Setting Up the Language Features Disc Menu : English Audio : English Subtitle : Automatic Setup Setup Display Setup Setup Disc Menu : English Audio : English Subtitle : Automatic Subtitle Language Automatic Subtitle Using the Audio Language Language Setup With the unit in Stop mode, press the MENU button.
-
Page 51: Setting Up The Audio Options
Setting Up the Audio Options With the unit in Stop mode, press the MENU button. Select DVD using buttons, then OK or Select Audio Setup using button. Use the buttons to select the desired item. Then press the OK or button. -
Page 52: Setting Up The Display Options
Setting Up the Display Options Setup Setup Display Setup Setup TV Aspect : 4:3 L-Box Black Level : PAL 60 Hz NTSC Disc Output DVD Out : Component With the unit in Stop mode, press the MENU button. Select DVD using Select Display Setup using button. -
Page 53: Setting Up The Parental Control
Setting Up the Parental Control The Parental Control function works in conjunction with DVDs that have been assigned a rating - which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. With the unit in Stop mode, press the MENU button. -
Page 54: A/V Receiver Connections
DIGITAL AUDIO OUT jacks on the back panel of the DVD-VCR to their corresponding Digital Audio Input jacks on your A/V Receiver: ★ • Optical (DVD-V80/ DVD-V85) • Coaxial • Use whichever connection is available on your A/V Receiver. -
Page 55: Special Playback Features
Special Playback Features During DVD/CD playback you can select from the following special playback options. To resume normal playback, press the (Play/Still) button. Still Press the ll (Play/Still) button on the remote control during playback. • The picture will still and the audio will mute. •... -
Page 56: Adjusting The Aspect Ratio (Ez View)
Adjusting the Aspect Ratio (EZ View) To play back using aspect ratio (DVD) Press the EZ VIEW button. • The screen size changes when the button is pressed repeatedly. • The screen zoom mode operates differently depending on the screen setting in the initial DVD menu. •... - Page 57 Adjusting the Aspect Ratio (EZ View) If you are using a 4:3 TV For 16:9 aspect ratio discs • 4:3 Letter Box Displays the content of the DVD title in 16:9 aspect ratio. The black bars will appear at the top and bottom of the screen. •...
-
Page 58: Using The Display Function
Using the Display Function ENG 5.1CH ENG 5.1CH ENG 5.1CH When Playing a DVD/VCD/CD During play, press the INFO. button on the remote. Use the Use the , • You may use the number buttons of the remote control to directly access a title, chapter or to start the playback from the desired time. -
Page 59: Changing The Camera Angle
Changing the Camera Angle Using the ANGLE button When a DVD contains multiple angles of a particular scene, you can select the Angle function. Press the ANGLE button to see if an ANGLE ) mark is present at the upper Right hand corner of the screen. -
Page 60: Repeat Play
Repeat Play Chapter Title A - B VCD / CD Track Disc A - B Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc. When playing a DVD Press the REPEAT button on the remote. Repeat screen appears. -
Page 61: Selecting The Audio Language
Selecting the Audio Language You can select a desired language quickly and easily with the AUDIO button. Using the AUDIO button Press the AUDIO button. Use the , buttons to select the desired language on a DVD. - The audio languages are represented by abbreviations. Use the buttons to select Stereo, ➢... -
Page 62: Using The Mark Function
Using the Mark Function CLEAR This feature lets you mark sections of a DVD or VCD (MENU OFF mode) so you can quickly find them at a later time. Using the Mark Function (DVD/VCD) During play, press the MARK button on the remote. The Mark icons will be displayed. -
Page 63: Mp3/Wma Play
MP3/WMA Play When an MP3/WMA Disc is inserted into the DVD player, the first song file of the first folder plays. • If more than two file extensions are present, select the media of your choice. • To change the currently playing media, press the STOP ( ■ ) button twice and then press the DISC MENU button. - Page 64 MP3/WMA Play CD-R MP3/WMA discs When playing CD-R/MP3 or WMA discs, please follow all the recommendations for CD-R above, plus the comments below: • Your MP3 or WMA files should be ISO 9660 or JOLIET format. ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows, and with Apple's Mac.
-
Page 65: Program Play & Random Play
Program Play & Random Play Program Play (CD/MP3/WMA) Press the MODE button. Use the , buttons to select PROGRAM. Press the OK button. Use the buttons to select the first track to add to the program. Press the OK button. The selection numbers appear in the Program Order box. -
Page 66: Picture Cd Playback
Picture CD Playback Album Photo : 1 /215 Photo : 1 /215 Timer : ➢ • When the banner is being appeared, press the RETURN button to return to the album screen. • If no buttons on the remote controller pressed for 10 seconds, the menu will disappear. Press the •... - Page 67 Picture CD Playback CD-R JPEG Discs • Only files with the ".jpg" and ".JPG" extensions can be played. • If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played. •...
-
Page 68: Technical Specifications
Technical Specifications Rated voltage Power consumption Weight General Size Operating ambient temperature Installation conditions Video input (Rear) Input Audio input (Rear) RF out Audio (DVD, VCR) Output Audio (DVD only) Video (DVD, VCR) Video (DVD only) Tape format Color system Tuning system Video S/N Resolution... -
Page 69: Problems And Solutions (Vcr)
Problems and Solutions (VCR) Before contacting the Samsung after-sales service, perform the following simple checks. Problem No power You cannot insert a video cassette The television programme was not recorded Timer recording was unsuccessful No playback picture or the picture... -
Page 70: Troubleshooting Guide (Dvd)
00169N DVD-V70/XSA-GB 4 11/14/05 Troubleshooting Guide (DVD) Before requesting service (troubleshooting) Problem Disc does not play. 5.1 channel sound is not being reproduced. icon appears on screen. Playback mode differs from the Setup Menu selection. The screen ratio cannot be changed. - Page 71 THIS APPLIANCE IS DISTRIBUTED BY ELECTRONICS www.samsung.com.au AK68-00169N...
Need help?
Do you have a question about the V80 and is the answer not in the manual?
Questions and answers