How Do I Adjust the Surround?
To check the Surround Play status
1. Touch
(listen mode) on the Quick Access menu to open the Lis-
ten Mode menu:
2. Touch
. This displays the Input Signal Status screen, which shows
the signal being displayed:
During playback of Dolby Digital, MPEG or DTS signal, the surround
identification signal in the input is identified and displayed by means
of the L, C, R, SR, SB, SL and LFE icons.
L : Left front channel
R : Right channel
SL : Surround left channel
LFE : Low frequency effect channel
3. Touch
to return to the previous menu or touch one of the Quick
Access menu buttons to proceed to the next operation.
C : Center channel
SR : Surround right channel
SB : Surround back channel
S : Surround channel
21