Installing Your Vcr; Connecting The Vcr To The Tv, Aerial And Satellite Receiver - Sharp VC-MH780BM Operation Manual

Module 02E.fm Page 4 Monday, November 19, 2001 2:24 PM

INSTALLING YOUR VCR

CONNECTING THE VCR TO THE TV, AERIAL AND
SATELLITE RECEIVER
•
•
•
•
Downloaded from: http://www.usersmanualguide.com/
Connect the VCR to the
mains
Optional: Connect your
Satellite receiver or decoder to
the VCR using a scart lead to
LINE 2 IN/DECODER
socket on the VCR.
DECODER UNIT
OR SATELLITE SYSTEM
Do not connect a SCART lead if you wish to tune the VCR RF channel, depending on your
TV.
To obtain stereo sound output, connect your stereo TV to the AUDIO OUT terminals using
audio phono leads or to the LINE 1 IN/OUT terminal using SCART leads as shown.
Sound from RF OUT terminal is MONO only.
If your TV has more than 1 SCART socket, refer to your TV operation manual for correct
SCART connection to the VCR.
✔ The VCR is correctly connected
Connect your existing aerial
cable to the ANTENNA IN socket
on your VCR.
Connect your TV
to the VCR using
the supplied RF
connection cable,
i.e. connect the
VCR RF OUT
socket to the TV
AERIAL IN
socket.
Optional SCART (not supplied). If you
have a scart lead connect it to your TV and
LINE 1 IN/OUT socket on the VCR.
-The advantage of a Scart connection is
improved picture and sound quality during
playback.
GB-4
AERIAL OR
CATV CABLE
BACK OF
TELEVISION