Siemens I-T-E Sensitrip MD Series Information And Instruction Manual page 43

Assembly Instructions
MD and ND-Frame Application
A complete kit consists of handle, cable and breaker operator
The handle can be mounted on either right hand or left hand
flange type enclosures. It can be locked in the OFF position
with up to three padlocks. A two piece door catch is provided
for applications where no interlocking door latch mechanism
is provided. The breaker operator mounts to the circuit
breaker and can be padlocked in the OFF position. The flexible
cable connects the handle to the breaker operator. The
handle operator can be used with I-T-E door latch mecha-
nisms DKR2, DKR3, DKL2. and DKL3.
Mounting
A. Turn off and lock out supply power before installing the
device.
B. Determine mounting location for the handle and circuit
breaker (See Figure 1 and Tables 1 and 2.)
Table 1 - Maximum E Dimensions
AAAA AAAA AA AAAA AAAA
AAAA AAAA AA AAAA AAAA
Enclosure Depth FHONCO48
0
2
6
18
20
24
30
36
Table 2 - F Dimensions
AAAA AA AAAA AAAA AAAA
AAAA Enclosur AA AAAA AAAA 48" Cable AAAA AAA AAAA AAAA
AAAA AA AAAA AAA AAAA
Depth
Up Down
10 8 21.5
12 7.5
16 6.5
18 6 20.5
20 6
24 4
30 -1.5 15.5
36 -
Table 2 shows the maximum horizontal distance that the
breaker can be located from the handle. Table 3 shows the
maximum vertical distance the breaker can be located from
the handle. Figure 2 shows the mounting range of the circuit
breaker within the enclosure. NOTE: Minimum Bend Radius
for the Cable is 3 1/2 in.
C. Drill the mounting holes for the handle and circuit breaker
and file all burrs.
Handle Installation
A. Push rubber gasket (1) into the groove of the handle
assembly (2) (Figure 3).
B. The handle and the interlock mechanism (3) are supplied
pre-assembled from the factory (Figure 3).
NOTE: For ease of assembly, move the operating handle to
the ON position (toward top of enclosure).
C. Mount the frame (4) and handle assembly to the enclo-
sure flange (5) using two 5/16-18 x 3/4 in. button head
cap screws and lockwashers. Tighten cap screws from
within enclosure (Figure 3).
AAA AAAA AAAA
AAA AAAA AAAA
FHONCO60
16 30
15.5 29.5
15 29.5
15.5 29.5
16 29
15.5 28.5
10 26
- 23
AAAA AAAA AAAA
AA AAAA AAAA AAA AAAA 60" Cable AAAA AAAA AAA
AA AAAA AAA AAAA AAA
Up Down
17.5 31.5
21 18 32.5
21 19 32
18.5 32
20 16.5 31.5
19 14 31
11 28.5
- 6.5 23.5
AA
AA
A
Figure 1
A
Figure 2
41