Siemens I-T-E Sensitrip MD Series Information And Instruction Manual page 4

2
The information contained herein is general in nature and is not intended for
specific application purposes nor is it intended as a training manual for
unqualified personnel. Refer to Note for definition of a qualified person.
It does not relieve the user of responsibility to use sound practices in
application, installation, operation and maintenance of the equipment
purchased or in personnel safety precautions. Should a conflict arise
between the general information contained in this publication and the
contents of drawings or supplementary material or both, the latter shall take
precedence. Siemens Energy & Automation, Inc. reserves the right to make
changes in specifications shown herein or add improvements at any time
without notice or obligation.
*Authorized and qualified personnel—
For the purpose of this manual a qualified person is one who is familiar with
the installation, construction or operation of the equipment and the hazards
involved. In addition, he has the following qualifications:
(a) is trained and authorized to de-energize, clear, ground, and tag
circuits and equipment in accordance with established safety prac-
tices.
(b) is trained in the proper care and use of protective equipment such as
rubber gloves, hard hat, safety glasses or face shields, flash clothing,
etc., in accordance with established safety practices.
(c) is trained in rendering first aid.
These instructions do not purport to cover all details or variations in
equipment, nor to provide for every possible contingency to be met in
connection with installation, operation, or maintenance. Should further
information be desired or should particular problems arise which are not
covered sufficiently for the purchaser's purposes, the matter should be
referred to the local sales office, listed on back of this instruction guide.
The contents of this instruction manual shall not become part of or modify
any prior or existing agreement, commitment or relationship. The sales
contract contains the entire obligation of Siemens Energy & Automation,
Inc. The warranty contained in the contract between the parties is the sole
warranty of Siemens Energy & Automation, Inc. Any statements contained
herein do not create new warranties or modify the existing warranty.
IMPORTANT
NOTE
SUMMARY