Advertisement
21:Set Dry mode; data type: DPT_1.001 switch
Set value: 1-set as Dry mode
22:Set Fan mode; data type: DPT_1.001 switch
Set value: 1-set as Fan mode
23:Set mode +/-; data type: DPT_1.008 UpDown
Set value: 0-Down 1-UP
24: Set temperature +/-; data type: DPT_1.008 UpDown
Set value: 0-Down 1-UP
25: The fan speed +/-;data type: DPT_1.008 UpDown
Set value: 0-Down 1-UP
Notes:Some models do not support all of the above parameters, please contact
technical support engineer for details.For example: Indoor units in cooling only system
do not support auto or heating modes,if auto or heating modes are required , the
actual operating mode of the indoor units may not be the same as expected.
11
Advertisement
