Advertisement
●
① Bus interface：Power supply DC 29V, 10mA and connect to KNX bus；
② KNX programming button：press once to enter the programming mode,
press it again will exit.
③ KNX programming statues lamp：when it is light up means programming
status and can write data to the module by KNX bus
④ RS485 communication ports：Communication port between KNX module
and indoor unit.(support 2nd generation DC indoor unit)
●
KNX-02 is completely in conformity with EIB/KNX standard. ETS software
must be used by integrator to carry out configuration and project design. For
detailed information of ETS software, please contact knx association:
www.knx.org.
●
ETS database
https://www.sinclair-solutions.com in B2B section, or consult our company.
3. Wiring installation instruction
The Wiring diagram follows,the KNX-02 connect to the indoor Unit and KNX
Power.
KNX TP-1
(EIB）bus
（*.vd*）of KNX-02 can be downloaded from our web site:
+ -
E
D2
D1
KNX-02
E
D2
D1
MAX 500m
indoor unit
6
Advertisement
