Toshiba Tecra S1 Series Resource Manual page 37

Positioning the disc in the drive
7 Gently press the disc onto the center spindle until you
hear it click into place.
8 Make sure the disc is completely on the spindle and is
lying flat on the tray.
9 Push the disc tray in by pressing gently on the center of
the tray until it clicks into place.
You are ready to use the disc.
Removing a disc with the computer on
To remove a compact disc (CD or DVD) with the computer
turned on:
1 Press the eject button on the drive.
2 Pull the tray until it is fully open, remove the disc, and
place it in its protective cover.
3 Gently push the tray in to close it.
To remove a compact disc with the computer turned off:
Using the DVD-ROM or multi-function drive
Be careful not to touch the drive's lens (located underneath the
drive's spindle) or the area around it. Doing so could cause the drive
to malfunction.
Make sure the disc is properly positioned on the spindle. If you
position the disc incorrectly, it can jam the disc tray.
Never use a pencil to press the manual eject button. Pencil lead can
break off inside the computer and damage it.
37