Toshiba Tecra S1 Series Resource Manual page 35

TECHNICAL NOTE: Your DVD-ROM or multi-function drive is set to
play region 1 (North America) DVD-ROMs. If you play a DVD disc
from another region, the drive will automatically change to play in
the format of the other region. The drive will allow you to change
regions four times. On the fourth change, the region will be "locked
in." That is, the drive will only play DVDs from that last region. Note
that changing from region 1 to region 2 and back to region 1 is
counted as two changes.
Drive in-use indicator light
Eject button
Manual eject hole
Sample DVD-ROM drive shown
Drive in-use indicator light—Indicates when the CD-ROM
or multi-function drive is in use.
Eject button—Press to release the disc tray when the system
is powered on.
Do not press the Eject button or turn off the computer while the Drive
in-use indicator light is glowing. Doing so could damage the disc or
the drive.
When the disc tray is open, be careful not to touch the lens or the
area around it. Doing so could cause the drive to malfunction.
Manual eject hole—Use if you need to release the disc tray
when the power is off. Use a straightened paper clip or other
narrow object to press the manual eject button located inside
the hole.
Never use a pencil to press the Eject button. Pencil lead can break off
inside the computer and damage it.
Using the DVD-ROM or multi-function drive
35