Output Settings; Customizable Preset 6Dof Filtering - Detailed Description Of The Parameters - Art ARTTRACK1 System User Manual

8 DTrack2 frontend software
'Adaptive
'Fast'
'Slow'
'Static'
'Reference tar-
get'
Mode hybrid
tracking
'Hybrid
'Hybrid
Table 8.13: Customizable preset 6DOF filtering - Detailed description of the parameters

8.5.7 Output Settings

In this dialogue one can determine the settings for data output via ethernet (see figure
8.18 on page 161). Tick the checkbox
output for each channel.
Please refer to chapter B on page 250 for the format of the data output.
In total up to 5 UDP data output channels can be configured. You can send data to any
computer within your local network. Just enter the IP address of the receiving client in the
box send to and choose a UDP port number in
Tick the checkbox this computer
you started the DTrack2
the range of 224.0.1.0 to 239.255.255.255 by ticking the checkbox multicast.
In order to reduce the amount of data from the data stream you can define a
divisor ' from 1 to 10. The divisor works the following way:
1 .. every frame is transmitted,
2 .. every second frame is transmitted,
...
10 .. every tenth frame is transmitted.
160
slow' Automatically adapts to the ob-
served motion, with stronger filter-
ing of fast motions.
Optimized for fast motions without
special filtering of slower motions.
Optimized for medium motions with-
out special filtering of slow motions.
Optimized for targets that are
known not to move at all.
Optimized for generally static ob-
jects, with automatic detection of
occasional motions.
target' Optimized for non-HMD hybrid tar-
gets incorporating an inertial sensor
unit.
HMD' Optimized for HMD hybrid targets
incorporating an inertial sensor unit
active
instead to send the data to the remote PC from where
frontend. You can also send the data to a group of addresses in
Moving targets with slow
and medium motions
Targets where quick reac-
tion is important, such as
HMDs.
Targets where quick reac-
tion is important, but mo-
tions are slow.
Reference
tached
objects
Reference
tached
moving objects.
for hybrid tracking only
Hybrid Motion Capture
HMDs and similar pro-
jective units (e.g.
glasses).
on the corresponding tab to enable data
UDP Port.
targets at-
to non-moving
targets at-
to occasionally
AR
'send data