Measurement Tool - Art ARTTRACK1 System User Manual

press OK to connect the viewer to
choose the Hand ID
The light adjacent to the
(green=tracked, red=not tracked). Finally click on one of the buttons featuring a hand to
see your tracked hand and fingers.
You can also start a small demo showing the handling of a virtual object by opening the
Demos menu. There is a limited number of simple demos available, e.g. you can handle
a virtual sphere or cube. To insert the virtual object into the tracking volume, place the
tracked hand at a convenient position and press the

6.5 Measurement Tool

Introduction The ART
ical applications. In this specialized field it is very important to measure positions of points
in high accuracy. For that reason the Measurement Tool is equipped with a measurement
tip. The position of the tip can be measured with the optical tracking system.
Description The Measurement Tool is an add-on to the
integrated into DTrack2
Please refer to chapter 8.4.1 on page 141 for details how to upgrade your system.
The pointing device carries a target that was developed to get optimal tracking quality for
DTrack2
you want to display
Hand ID setting indicates whether this hand is tracked or not
Measurement Tool is a pointing device for measurement or med-
Figure 6.26: Measurement Tool
by entering a license code, which can be purchased from
6.5 Measurement Tool
Grab object button.
ART tracking system and is
ART .
101