JRC J-Marine NeCST Instruction Manual page 16

CAUTION
Use J-Marine NeCST only as a navigation aid.
When using a created route, be sure to first check it by ECDIS, and then use the
route.
J-Marine NeCST does not necessarily match with the safety check result of the route
at ECDIS because it performs simplified route safety check.
Use J-Marine NeCST only as a navigation aid.
J-Marine NeCST divides a chart into multiple tiles and draws them. For this reason,
chart objects are sometimes drawn separately.
The Conning block of J-Marine NeCST outlines the information displayed on the
Conning product. For details of a variety of ship's information, check the Conning
product.
Do not use or leave the equipment under direct sunlight for a long time or at
temperatures of 55°C or higher. Otherwise, fire or malfunction may occur.
Do not place glasses or cups containing water, etc., or small metal objects on this
equipment. If water or such objects get inside, fire, electric shock, or malfunction may
occur.
Do not touch the equipment with hands or gloves wet with fresh water or seawater.
Otherwise, electric shock or other troubles may occur.
• Do not place objects that scratch on the display.
• Placing hot objects on the display may cause deformation of the display.
• Do not apply any undue shock on the display. Otherwise, malfunction may occur.
Be sure to turn off the main power supply before inspection or replacement of parts.
Otherwise, electric shock, fire, or malfunction may occur.
xiv