Changing Sticker Size And Direction - JRC J-Marine NeCST Instruction Manual

Changing Sticker Size and Direction

The size and direction of a placed sticker can be changed.
Handwritten data created is automatically saved every five seconds; no operation is needed.
Compatible ECDIS devices are shown below.
No.
1
2
3
Note
There are cases where an exported sticker cannot be used on an ECDIS.
In the case, check the instruction manual of the ECDIS and correct the parameter value of
sticker to a value less than the upper limit.
ECDIS device
JAN-701B/901B
JAN-7201/9201
FMD-3100/3200/3300
The size of these stickers can be
changed.
The direction of this sticker can be
changed.
(JRC) U_NeCSTs.uch
(JRC) U_NeCSTs.uchm
(FURUNO) U_NeCSTs.xml
3-87
Output format