3.7
Tool Function
The Tool function enables measurement of distance and bearing between points.
Use measured values as a guide for creating a route or handwritten data.
The tool function has the following sub functions:
Function name
Divider
To measure the distance and bearing of two points
Measure
To measure the distance between any points
Circle
To place a distance ring at any point
Loupe
To display the latitude and longitude of any point
Ruler
To place the ruler on the screen
Undo/Redo
Redoing the last operation
Use this function to measure the distance and bearing of two points.
The distance and bearing between the two points are displayed while the [Divider] icon is kept
touched.
Description
3-62
Related section
3.7.1 Divider Function
3.7.2 Measure Function
3.7.3 Circle Function
3.7.4 Loupe Function
3.7.5 Ruler Function
3.7.6 Undo/Redo Function