Network Remote Control - TiVo BOLT Series Viewer's Manual

Note: Not sure if your remote is paired? When a remote is paired with a TiVo box, the remote's activity light
flashes amber when you press a remote button. When a remote is not paired, the activity light flashes red.
UNPAIRING YOUR REMOTE (TO USE IT WITH A DIFFERENT TIVO BOX)
To pair the remote with a different box, you must first unpair it with the current box, then pair it with the new
one. Note that this process will reset the remote completely, so you will need to repeat setup of the remote's
programmable buttons (TV power, volume, mute). To unpair the remote:
1. Hold down the POWER and TiVo buttons at the same time until the activity light flashes.
2. Press THUMBS DOWN three times.
3. Press ENTER.
™
CABLECARD DECODER
This screen is typically used only during CableCARD installation.
A CableCARD decoder receives encrypted digital cable programming and decodes it for display on your TV
without the need for a cable box. The CableCARD decoder plugs into a compartment on the underside of the
DVR.
A CableCARD decoder is available only from your cable company and additional fees may apply from your
cable company. It replaces your digital cable box, and allows you to receive the same programming channels in
your subscription. To watch and record digital cable programming, you must install one Multi-Stream
CableCARD decoder (M-CARD). This one card will let you watch and record multiple shows at once.
EXTERNAL STORAGE
Use this screen when you want to add or remove a TiVo-verified external storage device. Visit tivo.com/expand
for more information on external storage solutions.
TIVO BOX NAME
Set or change the name of your TiVo box. You can choose from a list of suggested names or create your own.

NETWORK REMOTE CONTROL

You can integrate your TiVo box, home automation, and entertainment control devices on your network. These
devices include touch panel remotes and other devices that are configured to work with TiVo's network-based
remote control protocol. This setting will be enabled by your home entertainment or automation installer.
TUNING ADAPTER
If your cable provider uses a technology called switched digital video (SDV), you will need a tuning adapter in
order for your TiVo box to receive all channels in your subscription package. Please contact your cable provider
if you are not sure whether you need a tuning adapter.
For more information on tuning adapters and switched digital video, please visit tivo.com/switched.
LIGHTS
The lights on the TiVo box's front panel indicate when the TiVo box is receiving power, recording, receiving a
transferred show, or downloading shows over the network connection. You can choose to turn the lights on or
off. Even if you choose to turn off the front panel lights, one of the lights on the front panel will flash briefly when
a button on the remote is pressed. This indicates that the TiVo box is receiving a signal from the remote.
POWER SAVING SETTINGS
When you're not using your TiVo box, you can save power by letting the box go into Standby mode. Selecting a
higher power saving setting means that the box will enter Standby sooner and that TiVo Suggestions may not
record while the box is in standby. Scheduled recordings, transfers, and downloads will not be affected,
regardless of your power savings setting.
Off The TiVo box will never enter Standby.