Troubleshooting - Scheppach ASP50-ES Translation Of Original Instruction Manual

13. Troubleshooting

Fault Possible cause
Check whether the plug is plugged in.
Check whether there is power to the socket.
Motor does not run
Check whether the vacuum cleaner on/off
switch is switched on.
Is the brush blocked
Reduced vacuuming
power Is the dust bag full of dust
Is the filter full of dust
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Remedy
Plug the mains plug back in to the socket.
Call an electrician.
Switch the on/off switch on.
Switch the vacuum cleaner off to remove the
blockages.
Remove and empty the dust bag.
Remove and empty the filter.
GB | 21