ELIS PLZEŇ a. s.
3.2.2 Electronic unit box dimensions
3.2.3 Ultrasonic sensor
The sensor body is a welded piece consisting of two end flanges to be connected to the piping, the main pipe
section and two pipe branches holding the ultrasonic probes (see Fig. 4). In the standard sensor version the body is
designed for operating pressure PN 10, made of high-quality steel and the flanges are according to standard ČSN EN
1092-1; the whole assembly is coated with powder epoxy paint KOMAXIT E 2310 of light grey hue (RAL 7035).
On special request, the sensor body can be supplied:
Sensors for application in drinking-water supply systems are coated with powder epoxy paint KOMAXIT E 2110 of
blue hue (RAL 5017).
ELIS PLZEŇ a. s., Luční 15, P. O. BOX 126, 304 26 Plzeň, Czech Republic, tel.: +420/377 517 711, fax: +420/377 517 722
Product application, installation and service manual
Ultrasonic Flow Meter SONOELIS SE 4015 and SE 4025
SONOELIS
COMFORT
ELIS PLZENa.s.
OFFICIAL SEALS
INSTALATION SEALS
M4
210
230
Fig. 3 Dimensional sketch of the electronic unit box
ULTRASONIC
PROBE
FLOW DIRECTION
Fig. 4 Ultrasonic sensor - description
4xO5,5
10
- in a stainless-steel version
- with ANSI or JIS flanges
- in version for PN 16 or PN 25 (piping sizes up to DN 500)
FLOW SENSOR
RATING PLATE
Page 6 of 44
64
85
Es 90 337 K/c