Table of Contents
Advertisement
INSTALLATION AND START-UP
PRECAUTION:
When working with the gun or doing maintenance on it, all suitable
protection must be used in accordance with the recommendations and specifications
given by the product suppliers.
HI-TECH provides a series of tools and accessories that are necessary for assembling the gun
(KT-00004-00). The unit comprises the following elements:
Grease tube (OR-00012), pipe for air connection (MA-00027), fast plug (RA-00109), fast plug
pin (RA-00110), drills for cleaning (see Components Manual), Service Manual (NR-00018) and
Components Manual (NR-00017).
1.
Completely close the manual valves by turning them clockwise. The manual valves control
the input flow of each product to the chamber and are located on the Coupling Block.
2.
Connect the air supply pipe to the connector at the rear of the gun.
3.
Connect the Isocyanate hose (red terminal) to the Isocyanate input connector (letter A) on
the Coupling Block.
4.
Connect the Polyol hose (blue terminal) to the Polyol input connector (letter R) on the
Coupling Block.
8/28
Figure .3
1.5 Issue
http://www.novag.eu/
Projection Gun novaG-M
Service Manual
Ref. NR-00018-ENG
Advertisement
Table of Contents
