Table of Contents
Advertisement
Projection Gun novaG-M
Service Manual
MAINTENANCE
To get the most out of your novaG-M gun, certain periodical maintenance operations must be
carried out.
Carefully read the safety data sheet provided by your supplier to prevent
any possible injury caused by incorrect handling of the raw materials and
solvents used in the process.
Deal with all waste caused according to current regulations.
To prevent serious damage caused by the impact of fluids under
pressure, never open a connection or do maintenance work on
components subject to pressure until you are sure that all pressure has
been eliminated.
Use suitable protection when operating, maintaining or simply being in
the area where the equipment is working. This includes, but is not limited
to, the use of protective goggles, gloves, shoes and safety clothes and
breathing equipment.
The equipment includes components which reach high temperatures and
may cause burns. The hot parts of the unit must not be handled or
touched until they have completely cooled.
To prevent serious injury caused by crushing or amputations, do not work
with the equipment if the moving part safety protections are not duly
installed. Make sure that all safety protections are correctly fitted after
carrying out repair or maintenance work on the equipment
17/28
1.5 Issue
http://www.novag.eu/
Ref. NR-00018-ENG
Advertisement
Table of Contents
